BS750 FINCM kọlụm abụọ CNC Beam Band Machine
| Usoro Mba. | Aha ihe | Oke | |
| 1 | Akụkụ nke ịwa osisi H-beam (na-enweghị ntụgharị akụkụ) (ịdị elu nke ngalaba × obosara flange) | Oke.750 mm×450 mm Min.200 mm×75 mm | |
| 2 | Hacksaw agụba | T: 1.3mm W: 41mm C: 6650mm | |
| 3 | Ike moto | Isi moto | 7,5 kW |
| 4 | Igwe mgbapụta hydraulic | 2.2 kW | |
| 5 | Mgbapu mmiri oyi | 0,12 kW | |
| 6 | Ahịhịa wheel | 0.12kW | |
| 7 | Turntable | 0.04 kW | |
| 8 | Linear ọsọ nke saw agụba | 20 ~ 80 m / nkeji | |
| 9 | Ịbelata ọnụego nri | Ndozi enweghị nzọụkwụ | |
| 10 | Oblique ọnwụ akụkụ | 0°～45° | |
| 11 | Ogologo okpokoro | Ihe dịka 800 mm | |
| 12 | Moto hydraulic isi na-amachi | 80ml/r | |
| 13 | moto hydraulic na-ejide ihu n'ihu | 80ml/r | |
| 14 | Akụkụ igwe | L*W*H | Ihe dịka 3640 × 2350 × 2400 mm |
| 15 | N'ozuzu ibu | Ihe dị ka kilogram 5500 | |
1, The gbalaga hụrụ agụba rorates na adopts variable ugboro stepless ọsọ mgbanwe, nke nwere ike gbanwee conveniently dị iche iche sawing ihe.
2, The sawing ndepụta adopts hydraulic akara na-aghọta stepless ndepụta.
3, The sawing agụba ndepụta adopts abụọ kọlụm ndu, na ezi rigidity, elu nkenke na-eji ire ụtọ ịwa ngalaba.
4, The gbalaga hụrụ agụba adopts hydraulic erughị ala, nke na-eme ka saw agụba ịnọgide na-enwe ezi erughị ala na ngwa ngwa ije, prolongs ndụ ọrụ nke ịhụ agụba, na n'ụzọ dị irè solves nsogbu nke erughị ala mutation.
5, E nwere usoro nke mberede ike-apụ na ntuziaka kpochidoro na sawing usoro iji gbochie hụrụ etiti si slide ala.
6, E nwere a set nke ntuziaka ezi ukpụhọde ngwaọrụ n'ihu na azụ nke saw agụba, nke nwere ike n'ụzọ ziri ezi bee isi, n'etiti na ọdụ nke doo ma melite ọnwụ ziri ezi.
7, Ọ nwere ọrụ nke laser itinye n'ọnọdụ, na ike n'ụzọ ziri ezi chọta sawing ọnọdụ nke doo.
8, Ọ nwere ọrụ nke mbịne ahụ hụrụ si 0 Celsius ka 45 Celsius.The Beam adịghị mkpa n'ịtụgharị, ma dum igwe nwere ike mechaa oblique ịcha akụkụ ọ bụla n'etiti 0 Celsius na 45°.
9, The ngwaahịa nwere ike jikọtara na SWZ usoro 3D mkpọpu igwe na BM usoro mkpọchi egwe ọka igwe na-etolite a mgbanwe mmepụta akara nke abụọ NC machining ngwá maka ígwè Ọdịdị.
| NO | Aha | Ụdị | Obodo |
| 1 | Ihe ntụgharị ugboro ugboro | INVT/INVANCE | China |
| 2 | PLC | Mitsubishi | Japan |
| 3 | Solenoid hydraulic valve | Justmark | Taiwan, China |
| 4 | Igwe mgbapụta hydraulic | Justmark | Taiwan, China |
| 5 | valvụ njikwa ọsọ | ATOS | Ịtali |
Mara: Nke dị n'elu bụ ọkọlọtọ ọkọlọtọ anyị.A ga-eji otu akụkụ dị mma nke ika ndị ọzọ dochie ya ma ọ bụrụ na ndị na-ebubata ihe dị n'elu enweghị ike ịnye ihe ndị ahụ ma ọ bụrụ na ọ dị ihe pụrụ iche.
Ụlọ ọrụ anyị na-eme igwe CNC maka nhazi ihe profaịlụ ígwè dị iche iche, dị ka profaịlụ Angle bar, H beams / U channels na efere ígwè.
| Ụdị azụmahịa | Onye nrụpụta, Ụlọ ọrụ Trading | Obodo / Mpaghara | Shandong, China |
| Isi ngwaahịa | Nwe | Onye nwe onwe | |
| Mgbakọta ndị ọrụ | 201-300 ndị mmadụ | Mgbakọta ego a na-enweta kwa afọ | Ihe nzuzo |
| Afọ Eguzobere | 1998 | Asambodo(2) | |
| Asambodo ngwaahịa | - | Ikike ikike (4) | |
| Akara ahia (1) | Isi ahịa |
|
| Nha ụlọ ọrụ | 50,000-100,000 square mita |
| Obodo / Mpaghara ụlọ ọrụ | No.2222, Century Avenue, High-tech Development Mpaghara, Jinan City, Shandong Province, China |
| Nọmba nke ahịrị mmepụta | 7 |
| Nrụpụta nkwekọrịta | Ọrụ OEM ewepụtara, Ọrụ Nhazi, Enyere Label Onye zụrụ |
| Uru mmepụta kwa afọ | US$10 Nde – US$50 Nde |
| Aha ngwaahịa | Ike Line Production | Nkeji emepụtara n'ezie (Afọ gara aga) |
| CNC Angle Line | Ntọala 400/afọ | Ntọala 400 |
| Igwe eji akwa akwa CNC Beam | Ntọala 270/afọ | Ntọala 270 |
| Igwe eji egwu egwu CNC | Ntọala 350/afọ | Ntọala 350 |
| Igwe na-akụ CNC Plate Punching Machine | Ntọala 350/afọ | Ntọala 350 |
| Asụsụ Asụsụ | Bekee |
| Ọnụ ọgụgụ nke ndị ọrụ na Ngalaba Azụmahịa | 6-10 ndị mmadụ |
| Nkezi Ogologo Oge | 90 |
| Ndebanye aha ikike mbupụ NO | 04640822 |
| Mgbakọta ego a na-enweta kwa afọ | nzuzo |
| Mkpokọta ego mbupụ | nzuzo |
