PLD3030A&PLD4030 Gantry Mobile CNC Drilling Machine
| Iaha tem | Oke | ||
| PLD3030A | PLD4030 | ||
| Machining kachaeferenha | Ogologo x obosara | 3000ｘ3000mm | 4000*3000mm |
| Ọkpụrụkpụ | 200mm | 100mm | |
| Ọrụokpokoro | Akụkụ obosara T-groove | 22mm | |
| Isi ike igwu mmiri | Qịdị n'otu | 2 | 1 |
| Oke mkpọpu alaogheredayameta | Φ12mm-Φ50mm | ||
| RPM(ntụgharị ugboro ugboro) | 120-450r/min | ||
| Morse taper nke spindle | Mba.4 | ||
| Spindle moto ike | 2ｘ7.5kW | 5.5KW | |
| Ebe dị anya site na ihu njedebe nke alaspindlena worktable | 200-550 mm | ||
| Gantry longitudinal ije (X-axis) | X-axis njem | 3000mm | |
| X-axis na-agba ọsọ ọsọ | 0-8m/min | ||
| X-axis servo moto ike | 2ｘ2.0kW | ||
| Ndokwasa axis X ziri ezi | 0.1mm / dum | ||
| Mfegharị nke isi ike (Y-axis) | Oke kacha anya n'etiti isi ike abụọ nke axis Y | 3000mm | |
| Opekempe dị n'etiti isi ike abụọ nke axis Y | 470 mm | ||
| Y-axis servo moto ike | 1.5KW | ||
| Nri mmegharị nke isi ike | Z-axis njem | 350mm | |
| Z-axis servo moto ike | 2*2KW | ||
| Ihe ebufe mgbawa na ntụ oyi | Chip ebufe moto ike | 0.75KW | |
| Ike mgbapụta mgbapụta oyi | 0.45KW | ||
| Eusoro nkuzi | Mgbakọta ike moto | Ihe dịka 30kW | Ihe gbasara20kW |
| N'ozuzu akụkụ nke igwe ngwá ọrụ | Ihe dịka 6970ｘ6035ｘ2990 mm | ||
1. Ihe kachasị elu nke ikpo ọkụ nke ngwá ọrụ igwe bụ 50mm, nke kachasị elu na-agbapụta ihe bụ 200mm, na nke kachasị elu bụ 3000x3000mm.
2. The igwe ngwá ọrụ na-onwem abụọ onwe servo ndepụta slide mkpọpu ike isi.
3. Ọnọdụ nhazi nke oghere nwere ike itinye ngwa ngwa na ọsọ nke 8m / min, na oge inyeaka dị mkpụmkpụ.
4. The spindle moto nke mkpọpu ike isi adopts stepless ugboro ngbanwe ọsọ iwu, na ndepụta ọsọ adopts servo stepless ọsọ iwu, nke bụ adaba iji rụọ ọrụ.
5. Mgbe emechara strok nri ịkụ ala, ọ nwere ọrụ njikwa akpaka.
6. The taper oghere nke spindle bụ Morse No. 4, na-onwem na Morse No. 4/3 reducer aka uwe, nke nwere ike iwunye akuakuzinwo ibe n'ibe na dị iche iche diameters.
7. A na-anakwere ihe owuwu mkpanaka nke gantry, igwe na-ekpuchi obere mpaghara na nhazi nhazi ahụ bụ ihe ezi uche dị na ya.
8. The X-axis ije nke gantry adopts elu amị ikike linear Rolling ndu okporo ígwè ụzọ nduzi, nke bụ mgbanwe.
9. A na-eji igwe eji eme ihe eji eme ihe eji eme ihe n'etiti mmiri, nke nwere ike ịmata ọnọdụ nke efere ahụ ngwa ngwa.
10. Usoro njikwa na-anabata ngwanrọ mmemme kọmputa nke dị elu nke ụlọ ọrụ anyị mepụtara ma kwekọọ na njikwa mmemme PLC, yana nnukwu akpaaka.
11. Ụgbọ okporo ígwè na-eduzi igwe na ụzọ ịghasa nut na-eji ngwaọrụ lubrication akpaka.
12. X-axis ndu okporo ígwè adopts igwe anaghị agba nchara telescopic mkpuchi mkpuchi, n'akụkụ abụọ nke y-axis ndu okporo ígwè na-anabata mgbanwe mkpuchi mkpuchi, na waterproof baffle na-agbakwunyere gburugburu workbench.
| Mba. | Aha | Ụdị | Obodo |
| 1 | Linear ndu okporo ígwè | HIWIN/PMI | Taiwan, China |
| 2 | Onye ọkwọ ụgbọ ala Servo | Mitsubishi | Japan |
| 3 | Smoto ervo | Mitsubishi | Japan |
| 4 | Ihe njikwa mmemme | Mitsubishi | Japan |
| 5 | Ngwa mmanu akpaaka | BIJUR/HERG | USA / Japan |
| 6 | Computer | Lenovo | China |
Mara: Nke dị n'elu bụ ọkọlọtọ ọkọlọtọ anyị.A ga-eji otu akụkụ dị mma nke ika ndị ọzọ dochie ya ma ọ bụrụ na ndị na-ebubata ihe dị n'elu enweghị ike ịnye ihe ndị ahụ ma ọ bụrụ na ọ dị ihe pụrụ iche.
Profaịlụ nkenke ụlọ ọrụ 
Ozi ụlọ ọrụ 
Ike mmepụta kwa afọ 
Ikike ahia 
