PLD7030-2 Gantry Mobile CNC Plate Drilling Machine
| Kachasịeferenha | Ogologo x obosara | 7000ｘ3000mm |
| Tmgbakasị ahụ | 200mm | |
| Tebụl ọrụ | T-groove nha | 22mm |
| Isi ike igwu mmiri | Ọnụọgụ | 2 |
| Ịkụ alaogheredayameta nso | Φ12-Φ50mm | |
| RPM(ugboro mgbanwe) | 120-560r/min | |
| Morse taper nke spindle | Nọmba.4 | |
| Spindle moto ike | 2X7.5kW | |
| Gantry longitudinal ije (x-axis) | X-axis ọrịa strok | 10000mm |
| X-axis na-agba ọsọ ọsọ | 0-8m/min | |
| X-axis servo moto ike | 2ｘ2.0kW | |
| Mfegharị nke isi ike (Y-axis) | Njem Y-axis | 3000mm |
| Y-axis na-agba ọsọ ọsọ | 0-8m/min | |
| Y-axis servo moto ike | 2X1.5kW | |
| Ike isi nri ngagharị (Z axis) | Z-axis ọrịa strok | 350mm |
| Ọnụego nri axis Z-axis | 0-4000mm/min | |
| Z-axis servo moto ike | 2X1.5kW | |
| Ihe ebufe mgbawa na ntụ oyi | Chip ebufe moto ike | 0.75kW |
| Ike mgbapụta mgbapụta oyi | 0.45kW | |
| Eusoro nkuzi | Usoro njikwa | PLC+ kọmputa dị elu |
| Ọnụọgụ anyụike CNC | 4 |
1. Ọnọdụ nhazi nke oghere nwere ike ịkwado ngwa ngwa na ọsọ nke 8m / min, na oge inyeaka dị mkpụmkpụ.
2. The igwe na-onwem na servo ndepụta sliding table ụdị mkpọpu ike isi.The spindle moto nke mkpọpu ike isi nakweere stepless agbanwe ugboro ọsọ iwu, na ndepụta ọsọ nakweere servo stepless ọsọ iwu, bụ adaba maka ọrụ.
3. Mgbe emechara strok nri ịkụ ala, ọ nwere ọrụ njikwa akpaka.
4. The taper oghere nke spindle bụ Morse No.4 na onwem na Morse no.4 / 3 mbenata aka uwe, nke nwere ike iji wụnye mkpọpu ibe n'ibe na dị iche iche diameters.
5. A na-anakwere ihe owuwu mkpanaka nke gantry, igwe na-ekpuchi obere mpaghara na nhazi nhazi ahụ bụ ihe ezi uche dị na ya.
6. The X-axis ije nke gantry na-eduzi abụọ elu ibu ikike linear rolling ndu ụzọ ụzọ abụọ, nke na-agbanwe.
7. The Y-axis ije nke ike isi slide oche na-eduzi abụọ linear Rolling ndu ụzọ abụọ, na chụpụrụ AC servo moto na nkenke bọl ịghasa ụzọ, nke ana achi achi elu nkenke nke mkpọpu ọnọdụ.
9. The igwe na-onwem na mmiri center ngwá ọrụ ntọala ngwaọrụ, nke nwere ike mfe ikpebi ọnọdụ nke flange.
10. Ọ na-onwem na mgbawa remover na coolant tank.Igwe mgbapụta jụrụ oyi na-ekesa coolant maka mkpọpu mkpụrụ osisi iji melite arụmọrụ mkpọpu na ndụ ọrụ nke akuakuzinwo ahụ.
11. Usoro njikwa na-anabata PLC ma kwadebere ya na kọmputa dị elu iji kwado nchekwa na ntinye nke usoro nhazi efere, na ọrụ ahụ dị mfe.The software ikpo okwu bụ window usoro, na enyi na enyi interface ọrụ, doro anya na irè akụ management, na ike mmemme ọrụ;Enwere ike itinye nha efere ahụ site na ahụigodo na aka ma ọ bụ ntinye site na interface U-disk.
| Mba. | Aha | Ụdị | Obodo |
| 1 | Linear ndu okporo ígwè | HIWIN/CSK | Taiwan, China |
| 2 | PLC | Mitsubishi | Japan |
| 3 | Servo moto na ọkwọ ụgbọala | Mitsubishi | Japan |
| 4 | Dọrọ yinye | JFLO | China |
| 5 | Bọtịnụ, ọkụ egosi | Schneider | France |
| 6 | Ịghasa bọọlụ | PMI | Taiwan, China |
Mara: Nke dị n'elu bụ ọkọlọtọ ọkọlọtọ anyị.A ga-eji otu akụkụ dị mma nke ika ndị ọzọ dochie ya ma ọ bụrụ na ndị na-ebubata ihe dị n'elu enweghị ike ịnye ihe ndị ahụ ma ọ bụrụ na ọ dị ihe pụrụ iche.
Profaịlụ nkenke ụlọ ọrụ 
Ozi ụlọ ọrụ 
Ike mmepụta kwa afọ 
Ikike ahia 
